Teejet IC18 SPREADER JOB COMPUTER Manuale Utente Scaricare il pdf (Pagina 22)

www.teejet.com

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

ISOBUS Job Computer : IC18 Spreader European

USER INTERFACE

User Interface allows the operator to select the system virtual terminal (VT) if more than one VT is available on the ISOBUS CAN.

MAIN SETUP MODE MENU STRUCTURE

| | | | | |

Counters Job Parameters Machine User Interface Communication Help

Figure 3-28: User Interface

1. From the Main Setup Screen , select USER INTERFACE.

NOTE: Settings are NOT automatically saved when selected. The

ACCEPT KEY must be selected to save the setting. Select the

ESCAPE KEY to escape without saving settings and return to

the previous menu.

Use Preferred VT

Use Preferred VT sets the virtual terminal preference to either on or off. If “On” is

selected, the preferred VT will be used. If “Off” is selected, the system will arbitrarily

select which VT to use (if more than one VT is available on the ISOBUS CAN).

NOTE: This should always be set to "off" unless another VT is on the CAN bus.

• To set the Use Preferred VT mode, select an option from the drop down menu

or use the UP/DOWN ARROWS to highlight the option.

COMMUNICATION

Communication establishes the IC18's ability to communicate with an external computer.

MAIN SETUP MODE MENU STRUCTURE

| | | | | |

Counters Job Parameters Machine User Interface Communication Help

Figure 3-29: Communication

1. From the Main Setup Screen , select COMMUNICATION.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Nessun commento

Teejet IC18 SPREADER JOB COMPUTER Manuale Utente Pagina 22